Siemens SITOP series - Contact Persons and Partners

SIMATIC STEP 7 function blocks
5.14 FB SITOP_BAT_3P
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
70 Function Manual, 11.2018, A5E37763954-09-76
Structure of UDT_BAT_3P_OUT data type
Table 5- 58
Parameter
Data type
Description
Operating_State
Byte
Operating state of the battery.
Calc_Battery_health
Byte Calculate battery health.
Description of
Operating_state
parameter
Table 5- 59
Status message
Description
0
Off
1 Startup
2
Normal operation
3
Shutdown after error
4
Limited charge
5
End of battery lifetime
6
Battery replacement required
7
Battery replacement completed
8
Battery defective
9
Not ready for buffering
10
Not completely loaded but ready for buffering
11
Ready for buffering
12
Deep discharge recovery