Siemens SITOP series - Page 85

WinCC Faceplates
6.3 View: State, UPS8600
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
85
Screen
area
Parameter
Description
Battery replacement completed 7 Red/Green, al-
ternating flashing
Battery defective
8
Red
Not ready for buffering
9
Green, flashing
Not completely loaded but ready for buffer-
ing
10 Green, flashing
Ready for buffering
11
Green
Deep discharge recovery
12
Red, flashing
Calculated
battery
health
Shows the calculated health of the battery.
Not OK
The battery health is not OK and it should be replaced.
OK
The battery heath is OK.
Screen: State when Pb battery is connected to UPS8600 module
Figure 6-6