Siemens SITOP series - Page 86

WinCC Faceplates
6.3 View: State, UPS8600
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
86 Function Manual, 11.2018, A5E37763954-09-76
Elements
Table 6- 6
Screen
area
Parameter
Description
UPS8600
battery
summary
infor-
mation
Operating
state and
<Text field>
The operating state displays various colors depending on the state of
battery connected to UPS8600.
The <text field> displays the operating state as plain text.
Text
Number
Color
Off
0
Grey
Startup
1
Grey
Normal operation
2
Green
Shutdown after error
3
Red
Limited charge
4
Yellow, flashing
End of battery lifetime
5
Yellow, flashing
Battery replacement required
6
Red, flashing
Battery replacement completed 7 Red/Green, al-
ternating flashing
Battery defective
8
Red
Not ready for buffering
9
Green, flashing
Not completely loaded but ready for buffer-
ing
10 Green, flashing
Ready for buffering
11
Green
Deep discharge recovery
12
Red, flashing
Calculated
battery
health
Shows the calculated health of the battery.
Not OK
The battery health is not OK and it should be replaced.
OK
The battery heath is OK.