Siemens SITOP series - Page 96

WinCC Faceplates
6.8 View: Trends, expansion modules
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
96 Function Manual, 11.2018, A5E37763954-09-76
Elements
Table 6- 12
Screen area
Parameter
Description
Trend CNX8600 I
out
n Displays the time curve for the current of output n.
In the configuration, the time axis (x-axis) is 5 minutes by default.
The Trend type is "Cyclical real time" and starts at the start of HMI
runtime.
A legend for assigning colors to the individual outputs is located on
the right side of the screen.