Parameterizing the SITOP UPS1600
6.2 Switching off the UPS when the power fails by a user program
SITOP UPS1600 under STEP 7 V12
Getting Started,
33
3. Drag the selected folder to the "Program blocks" folder in the project navigation and drop
it there.
4. Under global libraries, in the folder "Copy templates > UPS1600 function blocks (TIA
V12)", select folder "STEP 7 Tag table" and drag it to the "PLC variables" folder in the
project navigation and drop it there.
The library has now been integrated into the program.
Calling function block FB160
Calling the function block within an organization block (OB) is described in the following. In
this case, function block FB1600 is called within organization block OB1.
Note
Ensure that the update cycle of the organization block being used has a direct influence on
the update time of the function bl
ock.
To Next Page
Loading...
