4.2.2 Connecting the device
Procedure
① Feed separator with integrated load ⑥ Safety catch
② Supply voltage ⑦ Process connec‐
tion
③ Cable gland for supply voltage/current output ⑧ Protective conduc‐
tor connector/equi‐
potential bonding
terminal
④ Connecting terminals ⑨ Ground terminal
⑤ Test connector for DC measuring device
Figure 4-2 Example: Electrical connection with feed separator
1. Lead the connecting cable through the cable gland ③.
2. Connect the device to the plant using the existing protective conductor connection ⑧.
Connecting
4.2 Connecting the device
SITRANS P320/P420 (mA/HART)
Compact Operating Instructions, 06/2018, A5E38874562-AA 33
To Next Page
Loading...
