1.4 Intended use
Overview
Depending on the variant, the pressure transmitter measures corrosive, non-corrosive and
hazardous gases, vapors and liquids.
You can use the pressure transmitter for the following measuring tasks:
● Gauge pressure
● Absolute pressure
● Differential pressure
With appropriate configuration and the necessary add-on parts (e.g. limiters and remote seals),
the pressure transmitter can also be used for the following measuring tasks:
● Level
● Volume flow
● Mass flow
● Volume
● Customized characteristic curve
The output signal for all measuring tasks is a direct current of 4 to 20 mA.
You can install the "intrinsically-safe" or "flameproof enclosure" version of the pressure
transmitter in hazardous areas. The devices have a test certification and comply with the
corresponding directives.
Pressure transmitters with remote seals of various shapes can be provided for special
applications. For example, measuring high-viscosity substances is a special application.
Operate the device in accordance with the specifications in section Technical data (Page 55).
1.5 Product compatibility
Edition Comments Product compatibility Compatibility with device integra‐
tion package
06/2018 First edition HART
FW: 1.00.08 or higher
HW: 1.00.00 or higher
Device version 1
SIMATIC PDM V9.0 or higher
AMS Device Manager V13 or high‐
er
DTM Pactware V4.1 SP4
FC475 V3.9 or higher
Introduction
1.5 Product compatibility
SITRANS P320/P420 (mA/HART)
8 Compact Operating Instructions, 06/2018, A5E38874562-AA
To Next Page
Loading...
