Siemens SITRANS F FM100 - Measuring Mode

SITRANS FM100
A5E48762204-AA page 15
key symbol designation
function
Measuring mode
menu mode
value input
forward -
Menu level lower /
forward (last menu
level: Save value)
backward -
Menu function: menu
level higher / back
(last step: exit menu)
9.2 Measuring mode
After applying the supply voltage, the device starts in measuring mode. In this
mode, the measured values of the respective measuring variables are
continuously recorded; the current instantaneous flow values, temperature values
and the volume counter readings are cyclically calculated and displayed
according to the type of display.
In addition to the main display, the states and configuration of the outputs are
shown in the display. If the corresponding output is configured as an alarm
output, the status is also displayed with a green or red background color. If the
background color is green, the set threshold value is exceeded; if it is red, the
current value is still under threshold.