SITRANS FM100
A5E48762204-AA page 21
The called hotkey function remains permanently activated and can only be left by
pressing the key . A direct reset function is available for the MIN / MAX measured
value function and the partial quantity counter.
10.3.6 Key sensitivity
The sensitivity of the keys can be adjusted by setting the key sensitivity. The default
setting "Low" is the optimal one when using the device with a finger. When operating
with gloves, it is essential to select the "High" setting.
10.3.7 Menu Timeout
The menu timeout time defines the time after which the menu function is automatically
exited without pressing a key. In the setting "0 s" this function is deactivated and the
menu function can only be left by hand by pressing the back key several times.
To Next Page
Loading...
