Siemens SITRANS F FM100 - Page 37

SITRANS FM100
page 36 A5E48762204-AA
Sub-parameter
level 1
Sub-
parameter
level 2
Sub-
parameter
level 3
Description
Value range /
value list
Standard
value LPM
Standard
value GPM
Frequency
output
max. frequency
Value input
Frequency output at
"value at max. Hz"
50-1000 Hz 500 Hz
overflow
Overflow value in % of
the value
"max.frequency"
1-100 [%] 1%
Value at 0 Hz Value at 0 Hz
MB start ≤ value ≤
value at max. Hz
0
Value at max.
Hz
Value at "maximum
frequency"
Value for 0 Hz
<value ≤ Full scale
100
Control input
(only output 1)
Control function for MIN
/ MAX memory reset
OFF, memory reset Aus
KofiCom Factory calibration mode on output 1
IO-Link This mode activates the IO-Link function on output 1(standard factory setting)
Parameter table Output 1/2 – Volume
Sub-
parameter
level 1
Sub-
parameter
level 2
Sub-
parameter
level 3
Description
Value range /
value list
Standard
value
LPM
Standard
value
GPM
disabled
Output
deactivated
disabled
Pulse
output
Pulse unit List selection
Sets the Pulse
Volume for
Pulse Volume
ml, L, m3,
galUS, galUK,
User
L galUs
Pulse
volume
value input
Sets the value
for the pulse
volume
0.001-999 1
Pulse width
Sets the pulse
width
1-20.000 1 ms
KofiCom
Factory calibration mode on output 1
IO-Link
This mode activates the IO-Link function on output 1