Siemens SITRANS F FST030 - Page 112

Diagnosing and troubleshooting
9.4 Fault codes and corrective actions
SITRANS F Ultrasonic flowmeters FST030 (HART)
110 Operating Instructions, 08/2017, A5E35971532-AC
ID/
Icons
Diagnostic
Action
Comment
296
CH5 Channel simulated. Disable 'Simulation' to
return to normal operation.
Only hydrocarbon and water
297
CH6 Channel simulated. Disable 'Simulation' to
return to normal operation.
Only hydrocarbon and water
298
Standard volume flow Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water
299
Standardizing factor Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water
300
Standard kinematic viscosity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water
301
Standard density Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water
302
LiquIdent Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water
303
API gravity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water
304
Standard API gravity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon and water