Diagnosing and troubleshooting
9.4 Fault codes and corrective actions
SITRANS F Ultrasonic flowmeters FST030 (HART)
90 Operating Instructions, 08/2017, A5E35971532-AC
Read only
• Write access disabled
• Indicate read only parameters
Data exchange
• Device is communicating
Custody transfer enabled N/A
Memory card Capacity is 25 % used
Memory card Capacity is 50 % used
Memory card Capacity is 75 % used
Memory card Capacity is 100 % used
Fault codes and corrective actions
Alarms and system messages support both Siemens standard alarm classes and NAMUR
status signals.
In the following tables the alarm IDs (identification numbers) are listed along with possible
causes and directions for corrective action.
To Next Page
Loading...
