Description
3.2 Design
SITRANS F M MAG 3100
18 Operating Instructions, 06/2010, A5E03005599-01
3.2 Design
SITRANS F M MAG 3100 is available in a wide range of sizes (DN 15 to DN 2000 (½" to
78")) and pressure ratings (PN 6 to PN 100 / ANSI Class 150 / 300, AS 2129 / AS 4087. On
request up to 690 bar (10 000 psi)) The fully welded construction provides a ruggedness that
suits the toughest applications and environments.
Sensor housing and flanges are designed in carbon steel (ASTM A 105) and terminal box in
fibre glass reinforced polyamide or optionally in stainless steel (AISI 316). Measuring pipe is
made of stainless steel (AISI 304) while liners and electrodes are available in various
material, which makes the sensor highly resistant to a wide range of chemicals.
The present range of liner types includes:
● PTFE
● PFA
● Neoprene
● EPDM
● Linatex
● NBR
● Hard Rubber,
● Ebonite Hard Rubber
● PDM
Electrodes are available in:
● Hastelloy C276 or C22
● AISI 316 (1.4571)
● Platinum / Iridium
● Titanium
● Tantalum
The sensors carry a wide range of approvals, see
Technical data (Page 47).
To Next Page
Loading...
