Siemens SITRANS F M MAG 3100 - Page 50

Technical data
SITRANS F M MAG 3100
48 Operating Instructions, 06/2010, A5E03005599-01
Table 8- 1 Process connections
Version MAG 3100 P MAG 3100 MAG 3100 HT
EN 1092-1, raised face
(EN 1092-1, DIN 2501 & BS
4504 have the same mating
dimensions)
• DN 15 ... 50 (½" … 2"): PN
40 (580 psi)
• DN 65 ... 300 (2½" … 12"):
PN 16 (232 psi)
• DN 200 ... 300 (8" … 12"):
PN 10 (145 psi)
• DN 65 ... 2000 (2½" …
78"): PN 6 (87 psi)
• DN 200 ... 2000 (8" … 78"):
PN 10 (145 psi)
• DN 65 ... 2000 (2½" …
78"): PN 16 (232 psi)
• DN 200 ... 600 (8" … 24"):
PN 25 (362 psi)
• DN 15 ... 600 (½" … 24"):
PN 40 (580 psi)
• DN 50 ... 300 (2" … 12"):
PN 63 (913 psi)
• DN 25 ... 300 (1" … 12"):
PN 100 (1450 psi)
• DN 15 ... 300 (½" … 12"):
PN 40 (580 psi)
• DN 65 ... 300 (2½" … 12"):
PN 16 (232 psi)
• DN 200 ... 300 (8" … 12"):
PN 10 (145 psi)
• DN 200 ... 300 (8" … 12"):
PN 25 (362 psi)
ANSI B16.5 (~BS 1560),
raised face
 ½" ... 12": Class 150 (20
bar (290 psi))
 ½" ... 24": Class 150 (20
bar (290 psi))
 ½" ... 24": Class 300 (50
bar (725 psi))
 ½" ... 12": Class 150 (20
bar (290 psi))
 ½" ... 12": Class 300 (50
bar (725 psi))
AWWA C-207, flat face - 28" ... 78": Class D (10 bar) -
AS 2129, raised face - ½" ... 48": Table E ½" ... 12": Table E
AS 4087, raised face -
 PN 16 (DN 50 ... 1200,
16 bar (232 psi))
 PN 21 (DN 50 ... 600, 21
bar (304 psi))
 PN 35 (DN 50 ... 600, 35
bar (508 psi))
-
JIS B 2220:2004 -
 K10 (1" ... 24")
 K20 (1" ... 24")
-
Other flanges and pressure
ratings
- On request On request
Table 8- 2 Rated operating conditions (Ambient temperatures)
1
Version MAG 3100 P MAG 3100 MAG 3100 HT
Sensor -40 … +100 ºC (-40 … +212
°F)
-40 … +100 ºC (-40 … +212
°F)
-40 … +100 ºC (-40 … +212
°F)
Ex Sensor -20 … +60 ºC (-4 … +140 °F) -20 … +60 ºC (-4 … +140 °F) For up to 150 °C (302 °F)
temperature of medium:
 -20 … +60 ºC (-4 … +140
°F)
For 150 ... 180 °C (302 ...
356 °F) temperature of
medium:
 -20 … +50 ºC (-4 … +122
°F)