Siemens SITRANS F M MAG 3100 - Page 53

Technical data
SITRANS F M MAG 3100
Operating Instructions, 06/2010, A5E03005599-01
51
Version MAG 3100 P MAG 3100 MAG 3100 HT
Grounding Electrode
material
 PTFE: None
 PFA: Hastelloy
Material as measuring
electrodes
Exceptions - see ordering
data
No grounding electrodes
Terminal box (remote
version only)
 Standard fibre glass
reinforced polyamide
 Stainless steel AISI 316
(1.4436)
 Standard fibre glass
reinforced polyamide
 Stainless steel AISI 316
(1.4436)
 Stainless steel AISI 316
(1.4436)
Cable entries
Remote installation
 2 x M20
 2 x ½" NPT
 2 x M20
 2 x ½" NPT
 2 x M20
 2 x ½" NPT
Compact installation MAG 5000/MAG 6000:
 4 x M20 or 4 x ½" NPT
MAG 6000 I:
 2 x M25 (for
supply/output)
 2 x ½" NPT
MAG 6000 I Ex de:
 2 x M25 (for
supply/output)
 2 x ½" NPT
MAG 5000/MAG 6000:
 4 x M20
 4 x ½" NPT
MAG 6000 I:
 2 x M25 (for
supply/output)
 2 x ½" NPT
MAG 6000 I Ex de:
 2 x M25 (for
supply/output)
 2 x ½" NPT
-
Table 8- 7 Certificates and approvals
Version MAG 3100 P MAG 3100 MAG 3100 HT
Calibration
Standard production
calibration, calibration
report shipped with
sensor
Zero-point, 2 x 25 % and 2 x
90 %
Zero-point, 2 x 25 % and 2 x
90 %
Zero-point, 2 x 25 % and 2 x
90 %
Conforms to PED (All EN1092-1 flanges
conforms to PED) – 97/23
EC1) CRN
PED (All EN1092-1 flanges
conforms to PED) – 97/23
EC1) CRN
PED (All EN1092-1 flanges
conforms to PED) – 97/23
EC1) CRN
Material certificate EN
10204 3.1
On request On request On request