SITRANS F M MAG 5000/6000
Operating Instructions, 01/2010, SFIDK.PS.026.G1.02
17
Installing/Mounting
4
This chapter describes how to install the flowmeter in the compact version as well as in the
remote version.
The transmitter is delivered ready for mounting on the sensor. The transmitter is delivered
with a compression plate ready for mounting on the sensor. No further assembling is
necessary.
The transmitter can be installed either compact on the sensor or remote.
Figure 4-1 Compact installation
Figure 4-2 Remote installation
CAUTION
See Cable requirements (Page 68) before installing transmitter
To Next Page
Loading...
