Connecting
5.1 Remote installation
SITRANS F M MAG 5100 W
Operating Instructions, 11/2010, A5E03063678-02
25
2. Remove SENSORPROM
®
unit from sensor and mount it on connection plate in
transmitter, see relevant transmitter operating instructions.
3. Fit the ½" NPT or M20 cable glands for supply and output cables.
4. Fit and connect electrode and coil cables as shown below.
6KLHOG
CAUTION
Unshielded cable ends
Keep unscreened cable ends as short as possible.
CAUTION
Prevent interference
Separate electrode and coil cables to prevent interference.
To Next Page
Loading...
