MAG 8000 & MAG 8000 CT
17
SFIDK.PS.026.D9.02
4. Commissioning
Customer selected
parameter list
The default parameter list is divided into functional groups with maximum 99 parameters
included.
Your own parameter list can be configured by generating a new parameter list and copying an
existing parameter to the new list. The parameters are updated and handled as the existing ones
and listed in the same order that they are copied to the parameter list.
There is no limitation on the number of customer-specified parameter lists. By saving the project,
the parameter list configuration will be available for use in the future.
Save the file with only the customer parameter list explored so future monitoring and changes
of parameters will be easier.
To Next Page
Loading...
