MAG 8000 & MAG 8000 CT
32
SFIDK.PS.026.D9.02
All segments of the display are alternately
flashed on and off during this test.
Index 5
Customer totalizer
5. Operation
Display test
Customer totalizer 3 indicates the totalized
volume since it was last reset. The totalized
volume follows totalizer 1 and the display “r”
indicates that it can be reset by activating a long
key function. When pressing the key while the
“r” is flashing, the totalizer 3 value will reset to
0 and the actual date and time will be stored
permanent in memory. The display information
will now alternate between customer volume
and the reset date.
Menu selection
By activating a middle key function, the menu
selection will flash indicating that a new
selection can be made.
After toggling to the menu of choice, a middle
key function will enter the selected menu.
Index 0 (when active)
Call out reset
Call-up reset window (index 0) is only shown
when the call-up function is activated. The “r”
indicates it can be reset by activating a long key
function. When releasing the key while the “r”
is flashing, the call-up function will be reset and
the window disappears.
To Next Page
Loading...
