Siemens SITRANS F M MAG 8000 - Menu Overview; Default Display Information and Accessible Display Menus

MAG 8000 & MAG 8000 CT
30
SFIDK.PS.026.D9.02
5. Operation
5.1.3 Menu overview
Flow tool parameter FT131 defines the default display information with selection between
• Totalizer 1 (Index 1)
• Totalizer 2 (Index 2)
• Flow rate (Index 3, updated with selected measuring frequency)
• Fault codes (Index 4)
• Customer totalizer (Index 5 - resetable)
Default information is shown after power up and after no key operation for 10 minutes.
Flow tool parameter FT130 defines the accessible menus on the display with selection off:
• Operator menu
• Meter info menu
• Service menu
• Data logger menu
• Statistic and leakage menu
• Revenue menu
Disabling display of the menu data will not affect the operation of the functions.
5.1.4 Default display
information and
accessible display
menus