Installing/Mounting
4.4 Remote installation
MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG
25
For remote versions the SENSORPROM
®
has to be removed from the sensor terminal box
and mounted in the remote transmitter.
Image 4-3 Remote installation
Cable length and type (as described in Cable requirements (Page 68)) must be used.
For installation conditions for sensors, see respective sensor operating instructions.
1. Remove sensor terminal box lid.
2. Remove SENSORPROM
®
unit from sensor terminal box.
To Next Page
Loading...
