6. Click on "Connection" tab and select "activated" for IrDA. Click "OK".
Note
Maximum data transmission rate
The maximum data transmitter rate for the MAG 8000 is 19 200 baud.
If the IrDA adapter is connected properly, a small IrDA icon will appear in the Windows
notification area.
When placing mouse at this icon, the device information will be shown (e.g. "MAG8000
SN1234 is in range").
Commissioning
6.2 Initial commissioning via SIMATIC PDM
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE 45
To Next Page
Loading...
