Read, write, print or export meter data
Select "Device" → "Upload to PC/PG" to load all device parameters from the device to the
offline data storage.
Only parameters (data) shown on white background can be changed. Red texts are off-line
data which are not stored in the MAG 8000 yet, whereas black texts show the actual meter
data. Each adjustable parameter has a "Default Value", a "Minimum Value", and a "Maximum
Value" which are prompted by right-clicking on the parameter. More information will be
available when the "Help" button is clicked.
Commissioning
6.3 Setting the basic parameters
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE 49
To Next Page
Loading...
