The meter configuration and parameters can also be exported as PDM data, and imported to
another location, e.g. another project or PC.
In the SIMATIC Manager view, right-click on the PDM object to be exported, select "Export…".
In the subsequent dialog box, specify the type of export as well as the name and location where
the PDM file containing the exported data is to be saved. Confirm the entries by clicking "OK".
Commissioning
6.3 Setting the basic parameters
SITRANS MAG 8000
Operating Instructions, 11/2018, A5E03071515-AE 51
To Next Page
Loading...
