1-23
1010PFM-3G
Section 1
3. Do not modify or dissemble the Battery Charger or Battery Pack, unless under direct permission
and supervision of qualified Siemens personnel.
4. The 1015BC-1 Battery Charger operates from a 100, 110, and 220 VAC (50/60 Hz) power source. It
features a universal power input. Therefore, no user switching is required.
5. The AC power input of the 1015BC-1 uses a standard IEC 320 connection. Siemens can provide the
appropriate power cord for proper connection to the AC outlets from most countries in the world.
6. Recharge the battery for at least 8 hours before using it for the first time.
The 1015BC-1 Battery Charger is NOT waterproof. Do not allow it to become wet, or attempt to
use it when wet. Exposure to a wet or submerged environment will result in damage to the unit
that cannot be repaired and could expose the user to the risk of electric shock.
The flowmeter is not intended for use while the Battery Charger is connected and the ambient
temperature is above 35°C (95°F).
CAUTIONS
To Next Page
Loading...
