Siemens SITRANS F - 2.9 The Datalogger Setup Menu

Setup
3.4 Inputs and outputs
FST030
108 Function Manual, 04/2017, A5E35693328-AA
Figure 3-7 Positive flow - channel 3 leads by 180°
Figure 3-8 Negative flow - channel 3 lags by 180°
3.4.1
Current input
The current input allows to provide an additional process value to the device for
compensation purposes.
The following current input options are available:
● Off
– Disables the diagnosis of the current input channel.
● Pressure
– Allocates the input current to the Process value Pressure.
● Medium temperature
– Allocates the input current to the Process value Medium temperature
● Density
– Allocates the input current to the Process value Density
● Kinematic viscosity
– Allocates the input current to the Process value Kinematic viscosity
● Sensor temperature
– Allocates the input current to the Diagnostic value Sensor temperature
● Auxiliary temperature
– Allocates the input current to the Diagnostic value Auxiliary temperature