Siemens SITRANS F - Status Output

Setup
3.4 Inputs and outputs
FST030
124 Function Manual, 04/2017, A5E35693328-AA
3.4.4.6.12 Fail-safe value
Description
Output value in case of a fault and when fail-safe behaviour configured to fail-safe value.
Setting
0.0 pulses/s to 12500.0 pulses/s
Default
1.0 pulses/s
Related
Path
Setup → Inputs and outputs → Channel 2 - output → Pulse output → Fail-safe value
3.4.4.6.13 Fail-safe minimum time
Description
Minimum time the output stays in fail-safe mode. Short events will be prolonged.
Setting
0 s to 100 s
Default
0 s
Related
Path Setup → Inputs and outputs → Channel 2 - output → Pulse output → Fail-safe minimum time
3.4.4.7
Status output
3.4.4.7.1 Status mode
Description
Select the functionality for the status output.
Setting
Alarm class; Alarm item
Default
Alarm class
Related
Path
Setup → Inputs and outputs → Channel 2 - output → Status output → Status mode
3.4.4.7.2 Sensor alarms (1)
Description
Selection of alarm items that impact the output. Mainly sensor alarms. Applicable if Status
mode = Alarm item.