Siemens SITRANS F - 4.6 THE RTD CALIBRATE MENU (optional)

Setup
3.4 Inputs and outputs
FST030
176 Function Manual, 04/2017, A5E35693328-AA
3.4.7.7.7 Pulses per amount
Description
Number of pulses which will be output when configured amount is reached.
Setting
1 to 65535
Default
1
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse output → Pulses per
amount
3.4.7.7.8 Pulse width units
Description
Units of pulse duration value used to configure Ch4 pulse width.
Setting
s (seconds); ms (milliseconds); μs (micro seconds)
Default
s (seconds)
Related
Path
Setup → Inputs & outputs → Channel 4 - input/output → Pulse output → Pulse width units
3.4.7.7.9 Polarity
Description
Logical polarity of pulse output.
Setting
Active high level; Active low level
Default
Active high level
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse output → Polarity
3.4.7.7.10 Fail-safe behaviour
Description
Current output reaction in case of a fault.
Setting
Last valid value; Hold; Current value; Fail-safe value
Default
Last valid value