Siemens SITRANS F - Calibration

Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
201
3.4.10.2.2 RTD wire configuration
Description
Wire configuration of connected RTD.
Setting
2-wire RTD; 3-wire RTD; 4-wire RTD
Default
4-wire RTD
Related
Path
Setup → Inputs and outputs → Channel 6 - input → RTD configuration → RTD wire configu-
ration
3.4.10.2.3 RTD wire resistance
Description
Resistance of cables in a 2-wire RTD system.
Setting
0.0 ohms to 50.0 ohms
Default
0.0 ohms
Related
Path
Setup → Inputs and outputs → Channel 6 - input → RTD configuration → RTD wire re-
sistance
3.4.10.3
Calibration
3.4.10.3.1 Offset
Description
Calibration offset.
Setting
-100 °C (-148 °F) to +100 °C (212 °F)
Default
0 °C (32 °F)
Related
Path
Setup → Inputs and outputs → Channel 6 - input → Calibration → Offset
3.4.10.3.2 Slope
Description
Calibration slope.