Siemens SITRANS F - 6 Th Process Value; Trend Scale Mode

Setup
3.6 Local display
FST030
230 Function Manual, 04/2017, A5E35693328-AA
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 6 → 5th Process Value
3.6.10.8
6th process value
Description
The display
6th Process Value
can be selected.
Setting Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Totalizer 2
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 6 → 6th Process Value
3.6.10.9
Trend scale mode
Description
The
Trend Scale Mode
can be selected with automatic scaling or fixed scaling.
Setting
Auto; Fixed
Default
Auto
Related
This parameter is only available if
View
is set to Totalizer or 1 Value and Graph.
If Fixed is selected,
Trend Scale Lower Limit
and
Trend Scale Upper Limit
must be
configured.
Path
Setup → Display → View 6 → Trend Scale Mode