Siemens SITRANS F - Page 270

Maintenance and diagnostics
4.4 Diagnostics
FST030
268 Function Manual, 04/2017, A5E35693328-AA
Options
Overflow; Underflow; Fail-safe behaviour active
Operation mode is set to Frequency output
Options
The pulse output has reached maximum pulse output frequency; Fail-safe behaviour active
Operation mode is set to Pulse output
Related
This parameter is only available if
Operation mode
is set to Current output, Frequency output
or Pulse output.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 2 - output →
Error status
4.4.3.2.5 Pulse counter (read only)
Description
This parameter shows the number of pulses since startup/last reset.
Related
This parameter is only available if
Operation mode
is set to Pulse output.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 2 - output →
Pulse counter
4.4.3.2.6 Reset pulse counter
Description
The pulse counter can be reset.
Setting
Cancel; OK
Default
Cancel
Related
This parameter is only available if
Operation mode
is set to Pulse output.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 2 - output →
Reset pulse counter