Siemens SITRANS F - Channel 3 - Input;Output

Maintenance and diagnostics
4.4 Diagnostics
FST030
Function Manual, 04/2017, A5E35693328-AA
269
4.4.3.3
Channel 3 - input/output
4.4.3.3.1 Operation mode (read only)
Description
The set Operation mode can be viewed in this parameter.
Setting Off; Current output; Frequency output; Pulse output; Status output; Digital input; Current
input
Default
Off
Related
In this parameter the setting of
Operation mode
is read out.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 -
input/output → Operation mode
4.4.3.3.2 Current input value (read only)
Description
Current input value - Read only
Options
Read only
Related
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 -
input/output → Current input value
4.4.3.3.3 Error status (read only)
Description
The error status of the channel can be viewed in this parameter.
Options
Upper saturation; Lower saturation; Fail-safe behaviour active
Related
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 -
input/output → Error status