Siemens SITRANS F - Page 272

Maintenance and diagnostics
4.4 Diagnostics
FST030
270 Function Manual, 04/2017, A5E35693328-AA
4.4.3.3.4 Channel value (read only)
Description
The channel value can be viewed in this parameter.
Related
if
Operation mode
is set to Current output, this parameter will show the current output value.
if
Operation mode
is set to Frequency output, this parameter will show the frequency output
value.
if
Operation mode
is set to Pulse output, this parameter will show the pulse output value.
if
Operation mode
is set to Status output, this parameter will show the status output value.
Path Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 - in-
put/output → Channel value
4.4.3.3.5 Pulse counter (read only)
Description
This parameter shows the number of pulses since startup/last reset.
Related
Path Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 -
input/output → Pulse counter
4.4.3.3.6 Reset pulse counter
Description
The pulse counter can be reset.
Setting Cancel; OK
Default
Cancel
Related
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 3 - in-
put/output → Reset pulse counter