Siemens SITRANS F - Reset Peak Values; Characteristics; Transmitter; Design (Read Only)

Maintenance and diagnostics
4.6 Characteristics
FST030
Function Manual, 04/2017, A5E35693328-AA
281
4.5.4.6
Reset peak values
Description
This command is used to reset the logging of the recorded maximum and minimum values
monitored. The drag pointers will be set to the current value.
Setting
Cancel; Ok
Default
Cancel
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 4 → Reset logging
4.6
Characteristics
4.6.1
Transmitter
4.6.1.1
Design (read only)
Description
Information about the main design features of the transmitter.
Path
Maintenance and diagnostics → Characteristics → Transmitter → Design
4.6.1.2
Hazardous area approval (read only)
Description
Text describing the hazardous area approval of the transmitter.
Path
Maintenance and diagnostics → Characteristics → Transmitter → Hazardous area approval
4.6.2
DSL
4.6.2.1
DSL variant (read only)
Description
DSL variant. Wall mount housing with internal DSL.