Siemens SITRANS F - Advanced Logging (Expert); Simulation; Simulation Inputs and Outputs; Channel 1 - Output with HART

Maintenance and diagnostics
4.8 Simulation
FST030
Function Manual, 04/2017, A5E35693328-AA
285
4.7.5.5
Advanced logging (expert)
Register 1...90
Description
The process value to be logged can be set in this parameter.
Setting
0 to 65535
Default
65535 Disabled
Related
This parameter is only available if
Data logging
is enabled and is for expert users only.
Path
Maintenance and diagnostics → SensorFlash → Data logging → Advance logging (expert) →
Register 1...90
4.8
Simulation
4.8.1
Simulation inputs and outputs
4.8.1.1
Channel 1 - output with HART
4.8.1.1.1 Simulation
Description
Enable or disable simulation of the current output.
Setting
Disabled; Enabled
Default
Disabled
Related
If this parameter is set to Enabled, the parameter
Simulation value
can be configured.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 1 -
output with HART → Simulation
4.8.1.1.2 Simulation value
Description
Sets starting value for Ramp simulation OR value for Fixed simulation.