Siemens SITRANS F - Simulation Process Values; Enable Simulation

Maintenance and diagnostics
4.8 Simulation
FST030
292 Function Manual, 04/2017, A5E35693328-AA
Setting
Disabled; Enabled
Default
Disabled
Related
Only if this parameter is set to Enabled, then the setting of parameter
Simulation value
will
be relevant.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
relay → Simulation
4.8.1.6.2 Simulation value
Description
Relay output value to be output when simulation is enabled.
Setting
0; 1
Default
0
Related
Only if parameter
Simulation
is set to Enabled, then the setting of this parameter will be
relevant.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
relay → Simulated value
4.8.2
Simulation process values
4.8.2.1
Enable simulation
Description
Select the process value(s) to be simulated.
Setting
Volume flow; Mass flow; Standard volume flow; Flow velocity; Sound velocity; Liquident;
Density; Kinematic viscosity; Pressure; Medium temperature; Standard density; Standard
kinematic viscosity; API gravity; Specific gravity; Standard specific gravity; Auxiliary tem-
perature; Standard API gravity; Standardizing factor; Liquid identifier
Default
None selected