Siemens SITRANS F - Medium Temperature; Standard Density; Standard Kinematic Viscosity

Maintenance and diagnostics
4.8 Simulation
FST030
Function Manual, 04/2017, A5E35693328-AA
297
4.8.2.11
Medium temperature
4.8.2.11.1 Simulation value
Description
Set the Medium temperature value to be simulated.
Setting
-273.0 °C (-459.399994 °F) to +400.0 °C (752.0 °F)
Default
20.0 °C (68 °F)
Related
Only if Medium temperature is marked in
Enable simulation
, then the setting of this
parameter
will be relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Medium tem-
perature → Simulation value
4.8.2.12
Standard density
4.2.8.12.1 Simulation value
Description
Set the Standard density value to be simulated.
Setting
0.0 kg/m
3
to 100000.0 kg/m
3
Default
1000.0 kg/m
3
Related
Only if Standard density is marked in
Enable simulation
, then the setting of this parameter
will be relevant.
The range and default setting are dependent on the selected
Unit
.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Standard densi-
ty → Simulation value
4.8.2.13
Standard kinematic viscosity
4.8.2.13.1 Simulation value
Description
Set the Standard kinematic viscosity value to be simulated.