Siemens SITRANS F - API Gravity; Standard API Gravity

Maintenance and diagnostics
4.8 Simulation
FST030
298 Function Manual, 04/2017, A5E35693328-AA
Setting
0.0 m
2
/s to 5000.0 m
2
/s
Default
0.000001 m
2
/s
Related
Only if Standard kinematic viscosity is marked in
Enable simulation
, then the setting of this
parameter
will be relevant.
The range and default setting are dependent on the selected
Unit
.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Standard kine-
matic viscosity → Simulation value
4.8.2.14
API gravity
4.8.2.14.1 Simulation value
Description
Set the API gravity value to be simulated.
Setting
-150.0 °API to +200 °API
Default 0.0 °API
Related
Only if API gravity is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
Path
Maintenance and diagnostics → Simulation → Simulation process values → API gravity →
Simulation value
4.8.2.15
Standard API gravity
4.8.2.15.1 Simulation value
Description
Set the Standard API gravity value to be simulated.
Setting
-150.0 °API to +200.0 °API
Default
0.0 °API