Siemens SITRANS F - Specific Gravity; Standard Specific Gravity

Maintenance and diagnostics
4.8 Simulation
FST030
Function Manual, 04/2017, A5E35693328-AA
299
Related
Only if Base API gravity is marked in
Enable simulation
, then the setting of this parameter
will be relevant.
Path Maintenance and diagnostics → Simulation → Simulation process values → Standard API
gravity → Simulation value
4.8.2.16
Specific gravity
4.8.2.16.1 Simulation value
Description
Set the Specific gravity value to be simulated.
Setting 0.0 °SGU to 10.0 °SGU
Default
0.0 °SGU
Related
Only if Specific gravity is marked in
Enable simulation
, then the setting of this parameter will
be relevant.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Specific gravity
→ Simulation value
4.8.2.17
Standard specific gravity
4.8.2.17.1 Simulation value
Description
Set the Standard specific gravity value to be simulated.
Setting
0.0 °SGU to 10.0 °SGU
Default
0.0 °SGU
Related
Only if Standard specific gravity is marked in
Enable simulation
, then the setting of this
parameter
will be relevant.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Standard spe-
cific gravity → Simulation value