Siemens SITRANS F - Auto Logout; Logout

Security
6.7 Auto logout
FST030
Function Manual, 04/2017, A5E35693328-AA
333
6.7
Auto logout
Description
The
Auto logout
function can be be configured. When the parameter is set to Off (default),
you will
not
be prompted for password for 10 minutes after the last key press. When the
parameter is set to On, you will be prompted to enter the password before each HMI
operation.
Setting
Off; On
Default
Off
Related
Path
Security → Access management → Auto logout
6.8
Logout
Description
The
Logout
function can be configured.
Setting
Default
Related
Path
Security → Access management → Logout