Siemens SITRANS F - 2.9 The Datalogger Setup Menu

2-56
1010ENFM-3B
Section 2
2.9 THE DATALOGGER SETUP MENU
This menu becomes available after picking Meter Type and Measurement Channel. The integral Datalogger
records data for eventual display on Graphics Screen, or for connection to an RS-232 compatible exter-
nal device (printer, computer, network, etc.). Use Datalogger Setup to select data items and real-time
events for datalogger reports. You can also set the logging interval, operating mode and screen format.
The Datalogger Setup menu allows you to choose time interval-based data categories or event-based
status alarms, and to specify the interval between data reports.
View Datalogger reports on the display screen or transmit them via the RS-232 Serial Port to external
printers and computers. Note that a single-channel meter uses a compression algorithm to maximize
data storage. This disables back scrolling of datalogger reports.
Datalogger Setup Datalogger Mode Off
Memory
RS-232 Output
Datalogger Data None
Site Id
Date
Time
Flow
Average Flow
Raw Flow
Total
Average Energy
Energy Rate
Energy Total
Ts
Tr
Td
Vs
Valc
Aeration
Alarms
Delta T (usecs)
Analog Inputs
CE*
Log Time Interval 5 Sec.
10 Sec.
15 Sec.
30 Sec.
1 Min.
5 Min.
15 Min.
30 Min.
1 Hr.
2 Hr.
4 Hr.
6 Hr.
12 Hr.
24 Hr.
Demand
(continued)
Ú
Ú
Ú
Ú
ÖÖ
Ö
Ö
Ú
Ú
Ú
THE DATALOGGER SETUP MENU STRUCTURE
Ö
Ö
*Only available on units equipped with Analog Input capability.