Siemens SITRANS FC330 - Page 240

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.2.2 Volume flow 2.2.2.1 Units
2.2.2.2 Custom units
2.2.2.3 Custom conversion factor
2.2.2.4 Decimal places
2.2.2.5 Low flow cut-off
2.2.2.6 Alarm and warning limits 2.2.2.6.1 Upper alarm limit
2.2.2.6.2 Upper warning limit
2.2.2.6.3 Lower warning limit
2.2.2.6.4 Lower alarm limit
2.2.2.6.5 Hysteresis
2.2.3 Standard volume flow 2.2.3.1 Units
2.2.3.2 Custom units
2.2.3.3 Custom conversion factor
2.2.3.4 Decimal places
2.2.3.5 Alarm and warning limits 2.2.3.5.1 Upper alarm limit
2.2.3.5.2 Upper warning limit
2.2.3.5.3 Lower warning limit
2.2.3.5.4 Lower alarm limit
2.2.3.5.5 Hysteresis
2.2.3.6 Standard density 2.2.3.6.1 Units
2.2.3.6.2 Standard density source
2.2.3.6.3 Fixed reference density
2.2.3.6.4 Linear expansion coeff.
2.2.3.6.5 Square expansion coeff.
2.2.3.6.6 Standard temperature
2.2.3.6.7 Upper alarm limit stand‐
ard density
2.2.3.6.8 Upper warning limit
standard density
2.2.3.6.9 Lower warning limit
standard density
2.2.3.6.10 Lower alarm limit stand‐
ard density
2.2.3.6.11 Alarm hysteresis stand‐
ard density
HMI menu structure
C.3 Menu item 2.2: Process values
SITRANS FC330
240 Operating Instructions, 01/2019, A5E44030648-AB