Siemens SITRANS FC330 - Page 97

Current/Frequency/Pulse
Text Options/Description
Operation mode Select the output functionality
Output function Configure the output basic settings
Scaling Configure the output scaling
Fail safe mode / Fail safe value Select the signal output reaction in case of a fault
Status
Text Options/Description
Status mode Select the digital output functionality
Configuration Configure the alarm (only if Alarm class or Individual alarms is selected)
Output polarity and delay Set the output polarity and delay
Relay output wizard
Relay output - channels 3 to 4
The Relay output can be configured to either discrete one or two-valve dosing control or alarm/
status.
1H[W
2IIGHOD\
2QGHOD\
2II
$ODUPLWHP
6WDWXVPRGH
6HFRQGDU\YDOYHGRVLQJFRQWURO
$ODUPFODVV
3RODULW\
$ODUPPRGH
3ULPDU\YDOYHGRVLQJFRQWURO
6LJQDORXWSXW
Text Options/Description
Status mode Select the status output functionality
Configuration Configure the alarm (only if Alarm class or Individual alarms is selected)
Output polarity and delay Set the output polarity and delay
Commissioning
6.3 Local commissioning via HMI
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 97