Siemens SITRANS FS130 - Page 62

5. Connect wires to terminals using wiring tool.
– Industrial enclosure:
5
4
5
6
Active current output Passive current output
⑤ C ⑥ Cp-
④ Ca+ ⑤ C
Functional Earth Functional Earth
Active current output Passive current output

+
-
U
0
,VLJQDO
C
8
LQW
Cp-
Ca+


+
-
,VLJQDO
C
Cp-
8
H[W
Ca+
U
0

6. Tighten cable gland.
Note
For Ex versions active or passive current output is preselected at ordering and cannot be
changed.
Non-Ex versions can be connected as either active or passive.
Note
Load
Signal output: < 500 Ω at 14 to 24 VDC (active), 14 to 30 VDC (passive)
Relay output: 30 VAC/VDC, 100 mA
Passive signal input: 15 to 30 VDC, 2 to 15 mA
Connecting
4.6Connecting industrial enclosure
SITRANS FS130 & FS230
62 Compact Operating Instructions, 12/2023, A5E38755607-AF