Siemens SITRANS FS130 - Local Display

WARNING
Hazardous contact voltage
Risk of injury through hazardous contact voltage when the device is open or not completely
closed.
The degree of protection speci󹪝ed on the nameplate or in Technical speci󹪝cations (Page97)
is no longer guaranteed if the device is open or not properly closed.
• Make sure that the device is securely closed.
WARNING
Risk of explosion when media above 100 °C 󹪞ows through the process 󹪞ange
Explosion protection is no longer guaranteed and the approval is nulli󹪝ed.
It is prohibited for media above 100 °C to continually 󹪞ow through the process 󹪞ange.
WARNING
Loss of explosion protection
Risk of explosion in hazardous areas if the device is open or not properly closed.
• Close the device as described in Connecting (Page35).
WARNING
Hot surfaces
Risk of burns resulting from hot surfaces.
• Take corresponding protective measures, for example by wearing protective gloves.
Note
Verify proper operation and con󹪝guration of all analog inputs
Incorrect con󹪝guration can have a negative impact on 󹪞ow compensation and produce errors in
󹪞ow rate.
5.2 Local display
The device is commissioned/operated with the buttons on the local display.
The buttons are actuated by touching the glass panel on the appropriate button. The
graphical display above the buttons gives a menu-guided operation of the individual device
Commissioning
5.2Local display
SITRANS FS130 & FS230
86 Compact Operating Instructions, 12/2023, A5E38755607-AF