Siemens SITRANS FS230 - Conformity with European Directives; CE Declaration; Requirements for Special Applications

2.1.3 Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European directives:
Electromagnetic
compatibility EMC
2014/30/EU
Directive of the European Parliament and of the Council on the harmoni‐
sation of the laws of the Member States relating to electromagnetic com‐
patibility
Low voltage direc‐
tive LVD 2014/35/EU
Directive of the European Parliament and of the Council on the harmoni‐
sation of the laws of the Member States relating to the making available
on the market of electrical equipment designed for use within certain
voltage limits
Atmosphère explo‐
sible ATEX
2014/34/EU
Directive of the European Parliament and the Council on the harmonisa‐
tion of the laws of the Member States relating to equipment and protec‐
tive systems intended for use in potentially explosive atmospheres
RoHS directive
2011/65/EU
Directive of the European Parliament and the Council on the restriction of
the use of certain hazardous substances in electrical and electronic equip‐
ment.
The applicable directives can be found in the EU declaration of conformity of the speci󹪝c
device.
2.1.4 CE declaration
Note
CE declaration
The CE declaration certi󹪝cate is available on the SensorFlash SD card delivered with the device.
2.2 Requirements for special applications
Due to the large number of possible applications, each detail of the described device versions for
each possible scenario during commissioning, operation, maintenance or operation in systems
cannot be considered in the instructions. If you need additional information not covered by
these instructions, contact your local Siemens o󹪟ce or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
Safety notes
2.2Requirements for special applications
SITRANS FS130 & FS230
12 Compact Operating Instructions, 12/2023, A5E38755607-AF