Siemens SITRANS FS230 - Page 16

Table 2-5 FSS200 Very High Temperature Sensors; Entity Parameters: Ui = 17.44 V, Ii = 461 mA, Pi = 1.00 W
MLFB Number Ci (nF) Li (uH) Temperature code
7ME3950aLAb 0 0 T5 for Ta ≤ 85°C
T4 for Ta ≤ 100°C
Where,
a = Approval: 5 (FM/CSA/ATEX/IECEX)
b = Size: 13,23,33,43,63,73,83
Note
Control drawing
* See Control drawing A5E37305975A
Installation variations
Note
Requirements for safe installation
• The sensors can be installed in Zone 0, Div. 1 as Intrinsically Safe.
• Standard remote installation with FST030 because the connection is certi󹪝ed Intrinsically
Safe.
Safety notes
2.3Use in hazardous areas
SITRANS FS130 & FS230
16 Compact Operating Instructions, 12/2023, A5E38755607-AF