3. Push cable through open gland and cable path.
4. Restore ferrule and tighten cap to lightly hold cable in place.
5. Connect ground to terminal and power to terminals L/+ and N/- using wiring tool in the
manner shown below at right.
① L/+
② N/-
③ Protective Earth (PE)
AC connection DC connection
Power: 100 to 240 V AC, 47 to 63 Hz
Power: 20 to 27 V DC
6. Close and latch power supply terminal protection cover.
7. Tighten cable gland.
Connecting
4.6Connecting industrial enclosure
SITRANS FS130 & FS230
64 Compact Operating Instructions, 12/2023, A5E38755607-AF
To Next Page
Loading...
