Siemens SITRANS FST030 - Page 122

ID/
Icons
Diagnostic Action Comment
299 Standardizing factor Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
300 Standard kinematic viscosity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
301 Standard density Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
302 LiquIdent Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
303 API gravity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
304 Standard API gravity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
305 Specific gravity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
306 Standard specific gravity Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
307 Rate of change Value simulated. Disable 'Simulation' to return
to normal operation.
Only hydrocarbon
Diagnostics and troubleshooting
9.8 Fault codes and corrective actions
SITRANS FST030 (Modbus)
122 Operating Instructions, 08/2018, A5E37367739-AD