Siemens SITRANS FST030 - Approvals; Sensorflash

10.7 Approvals
Note
Device-specific approvals
Always refer to nameplates on the device for device-specific approvals.
Table 10-16 Approvals
Description Specification
ATEX
● The transmitter (can be installed in Zone 2 for gas and Zone 22 for
dust):
Certificate FM 17ATEXyyyyX:
II 3(1) GD
Ex ec ia [ia Ga] IIC T5 Gc
Ex tc [ia Da] IIIC T85°C Dc
IECEx
● The transmitter (can be installed in Zone 2 for gas and Zone 22 for
dust):
Certificate: IECEx FM 16.yyyyX
Ex ec ia [ia Ga] IIC T5 Gc
Ex tc [ia Da] IIIC T85°C Dc
FM
● Transmitter:
– Class I Division 2 Groups A,B,C,D T5
– Class II Division 2 Groups E,F,G
– Class III Division 2
– Class I Zone 2 and Zone 22
*: See Control drawing: A5E32778336A
10.8 SensorFlash
Table 10-17 SensorFlash
Description Specification
SD card (S-300u)
Capacity 4 GB
File system support FAT32 / 8.3
Temperature range
Operation:
Storage:
-40 to +85 °C (-40 to 185 °F)
-40 to +100 °C (-40 to 212 °F)
Technical data
10.8 SensorFlash
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 129